Fulltec Impulse Corn and Impulse Soy
Impulse is a new “state of the art” innovative plant nutrition product from Spraytec. This product has its own special adjuvant, a complete set of chelated micronutrients, amino acids, phosphites, and proprietary ingredients. Impulse corn is best meant to be foliar sprayed on corn between V5 and V8. Impulse soy is best when foliar sprayed on soybeans before R1. Both products can also be applied in furrow at twice the rate per acre meaning a kit then treats 50 acres.
Nodofix Soy has selected bacterial strains (Bradyrhizobium japonica and Bradyrhizobium diazoefficiens) that increase the potential for biological nitrogen fixation in soybeans. When applied via seed treatment or in-furrow, the inoculant is concentrated close toe the roots, favoring plant-bacteria symbiosis.
- High quality inoculant
- Easy to apply
- Excellent source of nitrogen
- Less enivonrment impacts
- Selected bacteria with high nodulation capacity
- Excellent value for money
Nodofix Corn is a liquid inoculant composed of a pure culture of bacteria (Azospirillum brasilense – AbV5 and AbV6), which enhances plant growth.
- High quality inoculant
- Less environmental impacts
- Increased root area (improves nutrient and water absorption, increasing tolerance to water and saline stress)
- Excellent source of nitrogen
- Easy to apply
- Productivity increase
- Stimulates the production of phytohormones
- Selected bacteria from Azospirillum brasilense
- Excellent value for money
Fulltec Cube IR
Tar Spot is a new, devastating disease threatening corn production in America and is becoming more prevalent in Central Iowa. The significant reason for its spread is a deficiency showing up in corn of copper, zinc, and sulfur. Because of these deficiencies – manganese that is found in the leaves is not being utilized by the plant.
Fulltec Cube IR has all of the nutrients needed which should lead to excellent protection from Tar Spot. This safe product is less than half the cost of traditional treatments.
Since Tar Spot does not produce fruiting bodies, it can be difficult to spot. Adding Cube IR before rapid growth stage, between V6 and V12, the plant will have adequate supply of 4 nutrients to combat the fungus.
Fulltec Adjuvant is a special systemic formulation that reduces losses in agricultural application and nourishes the plant increasing its productivity. Its technologies include low dose application rates, high solubility, pH optimization, prevents inactivation of agrichemicals, and drift control. It presents constant emulsion without breaking down, increasing the contact surface between the drop and leaf. This product contains nitrogen and phosphorous which promotes fast absorption and translocation. Natural plant defenses are stimulated and strengthen the cell wall without causing phytotoxicity. The composition of Fulltec Adjuvant eliminates the use of other adjuvants or AMS. It is compatible with most non-alkaline products and must be added to the spray mix solution first.
Fulltec Zinc is a nutritional complex containing chelated nitrogen, phosphorus, sulfur, manganese, zinc, phosphites, and amino acids essential for crop development . Mn plays an important role in the plants metabolism, acting as activator of enzymes, chlorophyll synthesis, and photosynthesis. Zn controls the production of important growth regulators that affect the growth and development of plants. It is a product developed to suppress the deficient levels of Mn and Zn caused by the application of glyphosate or availability problems of these nutrients in alkaline soils. The phosphites of Mn and Zn increase plant tolerance to diseases and stress. Since they act as a growth activators and inductors of self-defense mechanisms against phytopathogenic fungi, they stimulate the production of secondary metabolites like phytoalexins, tannin, and lignin.
Fulltec Cube is a nutritional and health complex containing water soluble copper, boron, phosphorus and amino acids. This systemic product of high solubility and bioavailability for plants, induces the formation of flowers, fruits, and roots. It shows rapid absorption and has excellent translocation. It stimulates natural plant defense agents producing biochemical changes and strengthening of the cell wall. The copper component is essential in many physiological processes such as photosynthesis, respiration, distribution of carbohydrates, proteins and cell wall metabolism. The plant resistance to fungal diseases is related directly to the adequate supply of copper. Fulltec Cube contain in its formulation elements that reduce losses by evaporation, drift, and inactivation of pesticides, ensuring excellent application. Do not causes necrotic lesions and dismiss the use of adjuvants and correctors.
Fulltec K is a nutritional complex containing containing potassium, phosphate, and phosphorus with full solubility with full solubility and mobility. Its formulation has phosphites K which are rapidly absorbed and translocated in the plant, providing greater sanity (induces phytoalexins formation) and grain filling. Potassium is responsible for the uptake of photoassimilates that are produced in the leaves to the fruit, resulting in higher grain filling (greater productivity). In addition to the phosphite K and P, it has in its composition elements that improves the application of pesticides.
Fulltec Nitro is a state-of-the-art systemic nutritional and phytosanitary complex. It is developed with high quality raw materials, to complement the nutritional and sanitary needs of the plants, while also providing excellent quality of spray and the application in the field. Plants treated with Fulltec Nitro present a more developed root system, with a greater number of secondary roots and absorbents. Fulltec Nitro treated plants feed better than those not treated. It is 100% water soluble, containing N, P, Co, Mo, Cu, amino acids, humectants and anti-evaporants. Nitrogen is an essential constituent of amino acids, proteins, nitrogenous bases, nucleic acids, hormones and chlorophyll, among other molecules. Nitrogen is fundamentally responsible for vegetative growth. However, since grain formation depends on proteins, the production of the plant is directly related to the nitrogen supply. Due to the high dynamism and mobility of N in the soil-plant-atmosphere, this nutrient is the one most susceptible to losses. Nitrogen losses easily reach rates of over 80% due to the limitations of base and cover fertilizations. In addition to these nutrients, Fulltec Nitro contains amino acids, which are related to the formation of physical and chemical barriers to the invasion of pathogens.
Fulltec Plus is a nutritional complex composed of nitrogen, phosphorus, boron, cobalt, molybdenum, sulfur, zinc, and amino acids that was developed aiming the health and nutrition of crops. Primarily developed to be applied to the seed, this product increases Biological Nitrogen Fixation and contributes to root development. This is a factor that directly influences the ability to absorb water and soil nutrients. Its composition avoids the use of adjuvants, surfactants and humectants, which is totally soluble and compatible with most agrichemical products. Plants treated with Fulltec Plus have a higher number of nodes, the root system is more developed increasing the amount of secondary roots, rootlets, and the absorbent.. This formulation allows the plant to express its full genetic potential, increase enzyme activity, accelerate the growth of the roots and shoots, increase water and nutrient absorption, and improve accumulation of photosynthats. Overall, the results of his product improve crop productivity.
Meloidogyne Javanica: Total nematodes per plant
Source: Spraytec R&D (2017)
Growthful™ is an auxiliary soil amendment that helps crops grow faster with higher yields, which means getting to the market faster than your competition. It works well with fertilizers, pesticides, fungicides and herbicides, and can be added to tanks with other chemicals to be applied in the same application. For use on corn, soybeans, and garden crops.
- Buffers and changes the soil pH
- Helps condition the soil for improved plant performance
- Increases, improves, and optimizes soil conditions for tolerance and resistance of abiotic stress
- Improves and increases water/nutrient availability, use, efficiency, processing, and retention
- Improves and increases soil/water nutrient retention, holding capacity, and permeability
Crownfx™ promotes root development including early season lateral roots which provides necessary support for tillering and shoot development. Avoiding Propiconizole during this phase is critical as a multispectral antimicrobial will terminate the symbiotic bonds with the plant.
- Enhance root mass
- Enlarge root area
- Increase kernel counts
- Release more tillers
- Increase seed head length
- Increase crude protein
Kannar Earth Science
KAN-7 contains soy protein hydrolysate obtained by the hydrolysis of proteins to their constituent amino acids and short peptides. It is optimized for promoting root growth and vigor, resulting in better crop establishment. As a seed treatment or in-furrow application, KAN-7 aids in more uniform emergence.
KAN-7 is compatible with all types of seed treatments, whether it be pesticidal, microbial, or a combination. KAN-7 is a liquid low-nitrogen product that was initially developed as a seed treatment, but we have found that it can also be applied in-furrow and as a foliar spray with added contribution to yield
Carbon Works CetaiN is a nitrogen additive for your soil mixed with carbon, hydrogen energy, and oxygen compounds. CetaiN stabilizes nutrients, cleanses the soil of harmful heavy metals and salts, feeds soil microbes, and promotes increased root growth.
CetaiN works by stabilizing the nitrogen in the soil by capitalizing on carbon’s powerful nutrient-holding capabilities. Then, using oxygen, it promotes the performance of the aerobic microbes that are responsible for making nutrients available to the plant.
Carbon Works Replenish conditions your water so you can use lower rates of pesticides and foliar fertilizers to achieve the same results. Minerals in your water often interact with herbicides, fungicides, fertilizers, and other treatments, which can reduce the effectiveness of your spray mixes by 30 to 50%. Replenish binds and neutralizes minerals to ensure maximum effectiveness of your spray products while optimizing and holding the pH of the water.
Replenish is a salt-free water conditioner as salt antagonizes plants, causing their leaf pores to close. The carbon molecules in Replenish open leaf pores and allows them to move faster throughout the plant than other products with salt, making your spray much more effective. It also feeds the beneficial soil bacteria and stimulates plant growth with the included energy, oxygen, and carbon.
A reacted plant nutrient high in calcium and silicon, which strengthens cell walls and reduces environmental oxidative stress.
Calcium nutrition – Critical to proper cell wall strength.
Environmental oxidative stress – The accumulation of oxygen-free radicals in plants. Excess oxygen-free radicals cause premature cell degradation.
Silicon nutrition – Research indicates that increased silicon levels in plants can improve cell wall integrity and reduce oxidative stress.
A reacted plant nutrient high in calcium that improves plant calcium nutrition due to high plant absorption and utilization due to micro-encapsulation.
A reacted nutrient product containing calcium, potassium, phosphate, oxygen, and propriety carbon compounds. It stimulates a brand range of antioxidant compounds.
A reacted plant nutrient high in potassium and phosphate unique in its ability to promote phenolic compound production. Use diKaP to reduce environmental oxidative stress and to increase plant yield and quality.
A reacted nutrient product containing proprietary botanical extracts. Highly beneficial where environmental oxidative stress causes root or vascular system damage.